Vanessa Pro 1 inch Classic flat iron, model LM-115, standing upright
1" Classic · LM-115
Curly to sleek · 1 pass
The 1 inch Classic lying on its side, plates slightly open, LCD and buttons visible
Floating mirror-finish plates
Control panel of the 1 inch Classic: the LCD reading 450 and its three buttons
LCD · 11 settings · 265–450°F
The 2 inch Wide, 1 inch Classic and 0.3 inch Mini lying side by side at the same scale
Same scale: 2" · 1" · 0.3"
Salon Pro Duo: the 2 inch Wide and the 1 inch Classic standing side by side at the same scale
Salon Pro Duo · 1" + 2" (Save $12)

1" Titanium Classic Classic flat iron

For chin to waist length hair of medium density. Gets close to the root and bends the ends.
$41.99
Plate widthCompare widths

Not for: very dense, coarse lengths (slow going → 2"), pixie cuts (→ 0.3").

Choose package
In US stockGet it Mon, Nov 16 – Wed, Nov 18
Free US shipping from our US warehouseArrives in 2–4 days (median 2.4 days). UK, CA, AU, NZ & EU in 7–12 business days.
3-year free replacement & 30-day returnsRegistered automatically here. Bought on Amazon? Register in 30 seconds.
In the box: 1" Classic (LM-115)Attached 6 ft swivel cord, 100–240V dual voltage, US two-prong plug.

Built for the long press.

Measured on our own samples.

Close-up of the control panel: the LCD reading 450 and the three buttons
Heat

300°F in under 30 seconds.

11 steps from 265°F to 450°F, shown on the LCD. Start low.

  1. 265°
  2. 280°
  3. 300°
  4. 320°
  5. 340°
  6. 355°
  7. 375°
  8. 390°
  9. 410°
  10. 430°
  11. 450°
The whole iron, three-quarter view
Weight

8.8 oz1" Classic: about two sticks of butter.

A full press keeps your arm up for a long time. Every ounce counts.

Iron weighed without the cord.

The open plates, close up
Floating plates

Plates that give 0.07 in.

The plates are spring-mounted and move under pressure, and they are polished to a mirror finish so the comb-chase glides.

The rounded plate housing at the tip of the iron
Rounded housing

Straighten, then bend.

The plate housing is rounded at the edges, so you can turn the iron at the ends for a bend or a flip.

Three widths,
side by side.

1"Titanium Classic · LM-115

Chin to waist length · medium density

$41.99
2"Titanium Wide · LM-133

Shoulder length or longer · medium to high density

$59.99View 2"
0.3"Titanium Mini · LM-1218A

Short cuts and detail work

$39.99$19.99 with a 2" WideView 0.3"
4.52 × 0.99 inPlate size
4.32 × 1.94 inPlate size
3.73 × 0.37 inPlate size
8.8 oz (250 g)Weight (no cord)
10.8 oz (307 g)Weight (no cord)
6.0 oz (169 g)Weight (no cord)
0.07 in plate travelSpring-loaded floating plates
0.13 in plate travelSilicone-cushioned floating plates
0.11 in plate travelSilicone-cushioned floating plates
In stockAvailability
In stockAvailability
Pre-orderShips Dec 1–3
On all three widths
  • 265–450°F11 LCD heat steps
  • 300°F in under 30sHeat-up
  • 6 ft (1.8 m) 360° swivelCord
  • 60-min auto shut-off
  • 100–240VDual voltage
  • 3-year free replacement
Measured on the bench
Plate width: 0.37" · 0.99" · 1.93"
1" Classic and 2" Wide at the same scale

Dry hair first.
Polished root to tip.

Finish one small, completely dry section at a time, with the comb in front of the iron.

  • Roots. Narrow enough to get close to the root.
  • Mid lengths. One slow, steady glide per section.
  • Ends. The rounded housing turns at the ends for a bend.

Where to
start.

340°F
265°F450°F
Start around 340°F on fully blow-dried hair. Go up one step only if a prepared section doesn't smooth.

Starting heat by hair type.

Starting LCD settings and technique by hair texture. Always use heat protectant on clean, fully dry hair.

LCD #7Type 3A–3C curls to sleek
375°F

Stretch it, then sleek it.

Blow-dry before you press. On long, thick Type 3 hair the 2" covers the back faster.

Full temperature chart ›
LCD #6Type 3 bends and flips
355°F

Straighten, then bend.

Clamp near the root, turn half a turn and glide down for a soft bend or flip.

Full temperature chart ›
LCD #9Type 4A–4C silk press
410°F

Stretched first, then one pass.

Wash, condition and blow-dry it straight. Work small sections with the comb in front.

Recommended: 2" Wide ›
LCD #6Type 4, colored or fine
355°F

Protect fine or dyed hair.

Heat protectant on every section: colored strands scorch at lower heat. Take thinner sections.

Recommended: 2" Wide ›
LCD #4Human hair wigs and bundles
320°F

Human hair only.

Synthetic fibers melt. Test a hidden weft first, then glide across the wefts.

Recommended: 2" Wide ›
LCD #5Roots and edges
340°F

Less heat near the skin.

Short hair near the scalp needs less heat, not more. Angle the plates away from the skin.

Recommended: 0.3" Mini ›

Frequently asked questions.